biocellpharma

  Purified Water System (PW)   System adopts the latest processes such as reverse osmosis and EDI. A complete set of purified water treatment process has been designed in a targeted manner. The quality of purified water meets the requirements of the current USP, EP, JP and ChP for purified water.   Pretreatment is mainly used to remove particles that may damage the film and free chlorine. The reverse osmosis process is to separate and remove the soluble solids, organics, colloidal substances and bacteria in the water by using the semipermeable spiral membrane. The raw water is sent to and passes through the reverse osmosis membrane under a certain pressure. The water passes through the tiny pore diameter on the membrane and is collected to obtain pure water. Different impurities are concentrated in the intercepting liquid and discharged. RO can remove more than 96% of dissolved solids, more than 99% of organic matters and colloids, and almost 100% of bacteria from raw wat...

  PW/ WFI D istribution S ystem   The distribution system is the core unit of the whole purified water system pharmaceutical , and its main function is to ensure that the pressure, flow and temperature delivered to the process pipeline meet the process production requirements. The system uses online monitoring instruments such as flow, pressure, temperature, conductivity and TOC to conduct safety performance, real-time monitoring and trend analysis of water quality, and effectively control the load of microorganisms in water through periodic disinfection or sterilization. In addition, sampling valves shall be installed on the water supply starting point, water pipeline and end pipeline of the entire distribution system for water quality sampling. The whole system is mainly composed of inverter, exchanger, sampling valve, diaphragm valve, sanitary pipe fittings, online monitoring instrument and other supporting control systems.   GENERAL PRINCIPLES OF PHARMACEUTICAL WATER ...

P ure steam generator  is one of the important equipment used for tank equipment, pipeline system and filter disinfection, and can also be used to drive sterilizer. The pure steam quality of the heat free ultra pure steam generator produced by BIOCELL meets the relevant provisions of EN285, and the quality of the pure steam condensate meets the requirements of the current Chinese Pharmacopoeia, USP, EPand JP for water for injection. Specification of Pure Steam Generator   Specification Steam Pressure(Mpa) Pure Steam Output(Kg/h) Steam Consumption(Kg/h) Purified Water Consumption(L/h) Pure Steam Pressure(Mpa) Dimension L×W×H(mm) PSG100 0.4 100 130 125 0.3 700×900×2500 PSG200 0.4 200 260 250 0.3 700×1000×2700 PSG300 0.4 300 390 375 0.3 800×1100×2800 PSG400 0.4 400 520 500 0.3 800×1200×3000 PSG500 0.4 500 650 625 0.3 800×1300×3100 PSG600 0.4 600 780 750 0.3 900×1300×3100 PSG700 0.4 700 910 875 0.3 900×1300×3100 PSG800 0.4 800 1040 1000 0.3 1000×1300×3200 PSG900 0.4 900 ...

  Pure Steam Generation System (PS/CS)   P ure steam generation   device  is one of the important equipment used in tank equipment, pipeline system and filter sterilization, and can also be used to drive the sterilizer. The quality of pure steam condensate prepared by Biocell pure steam generator meets the requirements for water for injection in the current USP, EP, JP and ChP, and also meets the relevant standards of EN285.   PURE STEAM GENERATOR WORKING PRINCIPLE Pure steam generator is composed of evaporator, preheater, buffer tank, condenser, electrical appliances, instruments and pipelines.   Its working principle is: qualified raw water enters the branch condenser after being pressurized by the raw water pump, and then enters the separator and evaporator. The liquid level is controlled by the liquid level switch. The industrial steam enters the evaporator to heat the raw water to the evaporation temperature and form a strong thermal cycle in the evapo...